Plastering is a very difficult process that requires a responsible approach. First of all, you should prepare the base well. To begin with, it is cleansed of impurities that may be present on it. After that, the surface needs to be leveled..
Want to know more about taber, but don’t know where? You can visit our website and find out the information you are interested in..
For this, putty is used. First, a rough coat is applied to eliminate large irregularities. After that, the base must be coated with a primer. When it dries a little, a finishing putty is applied to the wall to make the surface as even as possible. At the end, the base is primed again..
In addition, before starting plastering, you need to make sure that the wall is strong. Some not very well fortified areas may be found. If they are, then you need to get rid of them. Seams, which may be between the slabs, are especially well sealed..
Plastering is possible only if the temperature in the room is above + 5 ° C. At the same time, you need to be sure that such conditions in the room will remain for the next few days, while the plaster dries. If all these subtleties are taken into account, you can start the work itself..
