Before direct work on inserting the lock, it is necessary to mark the area where it will eventually be installed, after which the height for the location of the handle is already marked. And finally, you can proceed to drilling the hole itself, which is carried out using a drill. In this case, the size of the drill should slightly exceed the thickness of the lock by about a few millimeters, and as a result, the groove is finalized using a chisel. The lock is inserted into the obtained groove, and the holes for the handle and the locking mechanism, as well as the grooves, must be drilled out again.
Would you like to know more detailed information about the production of containers? Then we advise you to visit our website ru and find out all the information you are interested in about the production of containers.
Once the lock is properly inserted, you can tighten it with the screws, and also insert the locking mechanism, and put on the handle. When the work is over, and accordingly everything is perfectly secured, a functional check should be carried out. Normal performance is determined by the smooth and light operation of the door, there should be no jerks, as well as additional efforts. After that, they proceed to the installation of the crossbars, and for their accurate installation, the crossbar, latches and recesses must be chalked and the door closed. This will allow you to accurately transfer the marks on the box, which are drilled with a drill..
