Cast iron baths covered with enamel, both in the past and now, remain very popular. Such baths are distinguished by good strength, high coating resistance, durability and heat capacity. Before buying a bathtub, a thorough inspection is required for the presence of chips, roughness and cracks that are unacceptable. The first difficulty associated with installation is bringing the bathroom into the bathroom, the walls, floor, and door frame of which can get damaged. By the way, if you urgently need lamps, chandeliers or sconces, you can always buy them at a low price in the Decoromir online lamp store with delivery. To prevent damage, you need to protect the surfaces of the room with a hard material that can soften the blow. It is necessary to install a cast-iron bathtub strictly horizontally, because the slope required for draining the water has already been made in the design of the bathtub itself, therefore the floor in the bathroom must be leveled in advance. After bringing the bathroom into the room, you need to put it on its side to attach the legs and connect the siphon.
Then you need to connect the mixer and perform a compression connection of the pipes and nozzles of the mixer, using a gasket and fixing nuts. Next, it is necessary to connect the overflow and drain holes using a flexible hose. The fixation of the bath itself takes place with the help of tie bolts or special fasteners.
